Belarus FP SERIES

Can offer different voltage according to client's requirement.

Product Description

FP SERIES

 

*Using the latest generation of Class TD module, so that the FP series has become the most cost-effective power amplifier and favored by professional audio enthusiasts. 

*4 models of FP series are under the weight of 10.5kg, which results the reduction of transport costs effectively. This will become the pursuit of light weight and low cost engineering preferred.

 

1. Class TD power modules. 

 

2. Big power, high efficient and stable switching power supply. 

 

3. XLR multi-function input connectors.

 

4. SpeakON NL4 and binding post output connectors. 

 

5. Connection mode selection on the rear panel (Stereo / Bridge /Parallel). 

 

6. The whole machine is equipped with intelligent comprehensive electronic circuit high-speed protection. 

 

7. Independent channel protection and clip warning indicators on the front panel. 

 

8. Extremely light overall weight. 

 

9. Fresh and sweet sounding characteristics. 

 

Model   FP-450FP-600FP-800FP-1000
Output power (8Ω)2×450W2×600W2×800W2×1000W
Output power (4Ω)2×650W2×900W2×1200W2×1500W
Output power (2Ω)2×800W2×1200W2×1600W2×2000W
Output power (BRIDGE) (8Ω)1200W1800W2400W3000W
Output power (BRIDGE) (4Ω)1600W2400W3200W4000W
Frequency Response 20Hz~20KHz,+/-0.5dB
THD  20Hz ~ 20KHz(8Ω)0.2%
Signal-to-noise ratio -95dB
Damping coefficient (8Ω)>700
Input Sensitivity 0.75V, 1.0V, 1.5V
Input Impedance 20KΩ/10kΩ (Bal/Unbal)
Radiator Air flow from front to rear 从前到后吹风
Safeguard Short circuit, open circuit, thermal, RF protection.
On/off muting, DC fault shutdown, active inrush limiting.
N Weight 8.8kg9kg10.3kg10.5kg
Dimension (mm)483×361×89
Power Range (115V/230V)Can offer different voltage according to client's requirement.
 

 

Online Message


* Note: Please be sure to fill in the information accurately and keep communication open, we will contact you as soon as possible

Submit Message